
Buying the wrong size refrigerator is the most common — and most frustrating — appliance mistake. A French door fridge that is half an inch too tall won't slide under your cabinets, and doors that can't open past 90° can block the crisper drawers. Follow these steps before you shop.
What you'll need
- A metal tape measure
- A notepad or your phone
- A helper for tall measurements
Step 1: Measure the cutout width
Measure the opening between your cabinets or walls at the top, middle and bottom. Use the smallest number — walls are rarely perfectly straight. Most French door refrigerators are 30, 33 or 36 inches wide.
Step 2: Measure the height
Measure from the floor to the underside of the upper cabinet at the front and back of the opening. Use the smaller number. Remember that hinges on many French door models sit above the cabinet line.
Step 3: Measure the depth
Measure from the back wall to the front edge of your countertop. Standard-depth refrigerators stick out a few inches past the counter, while counter-depth models sit nearly flush.
Step 4: Allow clearance for airflow
| Area | Recommended clearance |
|---|---|
| Top | 1 inch |
| Back | 1–2 inches |
| Sides | ⅛–½ inch |
Step 5: Check door swing and delivery path
French doors need room to open fully so you can remove drawers. If your fridge sits next to a wall, look for models with a zero-clearance hinge. Finally, measure every doorway, hallway and turn on the way to your kitchen — the fridge has to get there first!
Bring your measurements to Bobo's
Our team can match your measurements to in-stock French door refrigerators at up to 60% off MSRP. Browse refrigerators or visit a store near you.
